Propane Tank Rules
The gas container, liquefied petroleum system or LP system is a collective term by OSHA that refers to the regulators, piping, hoses, regulators, fittings and valves. Depending on the tank capacity, the agency requires specific components. These individual components should undergo recognized laboratory testing. The right laboratory approval will show that the system components meet construction, pressure and thickness standards.
Tank Location
The organization OSHA determines how close the propane tank can be mounted in relation to ignitable materials, to buildings, to tanks containing flammable liquids, welders and cutting torches. These stringent regulations are implemented to make the jobsite really safe for the employees and those others who are nearby.
Nameplate Marks
LP systems require that the address, the name, the supplier of the container, and or the tanks trade name, be marked on the propane container. The container capacity is to be listed with the following information: gallons or pounds of fuel, square foot outside surface, fill level, and pressure. Furthermore, details regarding whether or not the container is made for installation underground or above ground is also visible. These markings have to be on a metal plate connected to the container somewhere in plain sight. OSHA requires that every tank needs to be marked by the Pressure Vessel Inspectors and National Board of Boiler in order to be considered ready and safe to utilize.
Tank Modifications and Repairs
Any kind of repairs to LP systems which require welding are regulated by OSHA. Repair personnel and tank owners need to know the regulatory codes and standards which the tanks were manufactured. Welding repairs to any component of the system that is subject to internal pressure should first comply with these fabrication codes. Other welding is just permitted on brakctes, saddle plates or lugs.
OSHA has worked hard to make sure that individuals working with lift trucks and people working in the vicinity of lift trucks are kept as safe as possible. They have stringent training procedures and regulations in place in order to make certain that these industrial equipment and their repair processes are handled with respect and as safe as possible. It is really essential that businesses follow their rules and steep fines can occur if they are not followed.