Change a Propane Tank
Propane fueled forklifts are normally utilized in warehouses. The lift truck is designed with the propane tank mounted behind the driver. The tanks, which look much like beer kegs, have to be replaced periodically because they have a limited lifespan. Operators of forklifts should always use caution when handling propane tanks. Compressed gases are dangerous, especially because the gas is flammable. Utilize care when replacing and removing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift should be left on until the engine dies. This process burns off the gas inside the transfer hose that connects the tank and the engine. Prior to taking the second steps, put on the correct safety equipment, like insulated gloves made of either neoprene or leather. It is very vital for you to protect your skin from touching the compressed gas, which is extremely cold.
2 The tank hose needs to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, tighten the nut to reattach the holding straps and to reattach the hose at the valve of the tank.
3 Leaks could be checked simply by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to froth from around the valve. If this occurs, check the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks in the area of the valve, and afterward perform the leak checking procedure over again. Persistent leaks mean that the nut and connecting hose must be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank would need to be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. Then you could start the forklift and continue working.